Cat?� 3406C Diesel Engine

The Cat^?� 3406C Industrial Diesel Engine is offered in ratings ranging from 298-347 bkW (400-465 bhp) @ 1800-2100 rpm and is available for global non-regulated areas. Industries and applications powered by 3406C engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Pricing: Contact for Pricing

Request a quote

Photos
360 VIEWS

Pricing: Contact for Pricing

Request a quote

Maximum Power	465HP
Maximum Torque	1602lb-ft @ 1350 rpm
Minimum Power	375HP
Rated Speed	1800-2100 rpm

Emissions	Non-Certified

Height	52.6in
Length	65.4in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	2866lb
Width	35.7in

Aftertreatment	-
Aspiration	Turbocharged Aftercooled
Bore	5.4in
Compression Ratio	14.5:1
Displacement	893.4in³
Engine Configuration	Inline 6, 4-Stroke-Cycle Diesel
Rotation from Flywheel End	Counterclockwise
Stroke	6.5in

Standard Equipment:

Air Inlet System
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
Control System
- Hydra-mechanical governor
Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
Exhaust System
- Exhaust manifold, dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
Flywheels And Flywheel Housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
Fuel System
- Fuel filter, LH
- Fuel transfer pump
- Fuel priming pump
Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
Lube System
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
Mounting System
- Supports
General
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment:

Gregory Poole Equipment Company

3.9

Based on 46 reviews

review us on

Renee Herndon

21:55 29 Feb 24

Dalton was very helpful, The road construction, however, was not! 😂I would rather have to sand paper an alligators @$$ in a phone booth that to get in that mess again.

Michael Birren

14:58 24 Feb 24

I purchased a used C-15 from a customer of Greg Pool was a running take out. I picked up the engine from the Greg Pool Cat near Nags Head NC. They started they had done all service on this engine stated the hours and all items replaced during the life of engine under their care. I just recently put the engine in my boat after 2 years of building the vessel I find that everything they said about the engine was a LIE!!! Turbo was Bad, After cooler was not updated to the newer version for the C-15 it was missing a terminal Resistor that was clearly stolen off the engine which created a major issue with start up upon installation. Greg Pool Caterpillar stated the hours at 3300 we find out there were 5700 hours. I didn’t do a start up or test run which I regret because i was dealing with a Caterpillar dealer i thought i could trust them. Clearly not Buyers Be Ware if your dealing with Greg Pool Caterpillar in NC. I have 3 of the C-15 engines in my Work boats here in Tampa Fl and my Cat dealership here is Ring power who have done an amazing job to get me going with this Engine. I am very Disappointed in The Caterpillar company for allowing such A dealership to exist.

13:04 22 Feb 24

22:00 18 Feb 24

01:17 16 Feb 24

15:26 23 Sep 23

OLEKSANDR “Alex” Kovalenko

14:27 18 Sep 23

👍

Hunter Elliott

16:17 07 Sep 23

Rick Kelly-Crapse

21:06 25 Aug 23

They had all my parts for my 3208 Cat.Friendly folks at parts counter.

Contact Us Today

Get In Touch

Call: (800) 451-7278