Cat G3516H Combined Heat and Power (CHP) Solution

Back to Home

G3516H Combined Heat and Power (CHP) Solution Gas Generator

Pricing: Contact for Pricing

Request a quote

Request a New Equipment Quote

Fill out this form below and we will get back to you within 1 to 2 business days! Alternatively, give us a call at 833-286-3561


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Request Machine Walkaround

    Find a Dealer Near You

    Continuous Rating 1982 ekW @ 1.0pf
    Frequency 60 Hz
    Frequency 60 Hz
    Fuel Type Natural Gas
    Maximum Electrical Efficiency 42.90%
    RPM 1500
    Aspiration TA
    Bore 6.7in
    Compression Ratio 11.1
    Displacement 4765in³
    Engine Model G3516H
    Fuel System Electronic Fuel Control Valve
    Governor Type ADEM™ A4
    Stroke 8.5in
    Dry Weight - Genset 40384lb
    Height 467in
    Length 716in
    Weight 166600lb
    Width 155in

    Standard Equipment:

    • G3520H, V20, 4-stroke-cycle, gas engine. Operates on 31.5 to 47.2 MJ/NM3 dry pipeline natural gas. Turbocharged Separate Circuit Aftercooled.
    • On Package EMCP 4.3 Control Panel System Offers engine and generator monitoringand protection, voltage regulation with Cat IVRimproves transient response performance. Controls provide auto paralleling AGC-4 controller, load sharing, VFDcontrol, and primary generator protection for greaterversatility, package utilization and monitoring.
    • Package Mounted Air Cleaner with service indicator
    • ANSI/DN customer flange connections for JW inlet and outlet
    • Engine driven water pumps for jacket water and aftercooler
    • Jacket water and SCAC thermostats
    • Standard cooling provides 40⁰C (104⁰F) ambient capability with 500mg/Nm3 NOx at 100% Continuous rating before derate, @ 500m
    • NSPS Factory Compilant, UL2200 Compilant and CSA / TSSA Sound attenuated 75 dB(A) @ 7 m (23 ft) Sound attenuated air intake louvers and lockable personnel doors with panic release LH and RH engine service doors integrated intocontainer side walls 3” ANSI flange customer fuel connection
    • Integrated crankcase ventilation system (CCV)and gas fuel train NFPA37 & CSAB149.3 with external fuel connections package utilization and monitoring.
    • Provides for single unit stand-alone operation,island mode paralleling and load sharing withother power modules, and single unit-to-utilitymode paralleling for base load control
    • Integrated enclousre holding tanks: Oil makeup tank (50 gallon), Waste oil tank (300 gal / 2 oil changes), Fresh oil tank (500 gal / 2 oil changes + makeup) and oil level regulator. Low level annunciation
    • Externally mounted exhaust system (muffler and heat exchanger)
    • Dry exhaust manifolds, insulated and shielded
    • Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
    • Center section cooled turbocharger with Cat flanged outlet
    • Fire detection system
    • LSI Long-Time, Short-Time, Instantaneous Annunciator
    • 5000A 3-Pole IEC Rated Circuit Breakers
    • Rear-mounted
    • Electronic fuel metering valve
    • Throttle plate, 24V DC actuator, controlled by GECM
    • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
    • Electronic Ignition System (controlled by ADEM A4)
    • Individual Cylinder Detonation Sensitive Timing (DST)
    • Double bearing SR5 1866 frame, brushless, form wound, 12-lead design, permanent magnet excited, three-phase, with Cat IVR, Class H insulation operating at Class F temperature. Stator and Bearing temperature monitoring and anti-condensation space heaters.
    • SR4B
    • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
    • Paint- Caterpillar Yellow except rails gloss black
    • Busbar connections
    • Crankshaft Vibration Damper and Guard
    • Parts book
    • Reactive droop
    • SR5
    • Anti-condensation space heater
    • RH Service
    • Operation and maintenance manuals
    • Winding temperature detectors
    • ADEM A4 4-20mA (0-5VV) Speed Input

    Optional Equipment:

    • Mounting Brackets and Piping
    • Air cleaner with precleaner
    • Frame Mounting
    • MP- Frame 6 Pole Bottom Cable Entry
    • No UV trip or package mounted CB Wiring
    • 4000/5000A Neutral Current Transformer Automatic Selection
    • Local alarm module
    • Engine failure relay
    • Remote PC Monitorring
    • Remote Communications Module (PL1000T, PL1000E)
    • Synchronizing module
    • Local PC Monitorring
    • Remote annuciator
    • 16 Point/32 Light Annunciator, Shipped Loose
    • Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay
    • Cat Connect: Ehternet, Satellite, Cell Telematics
    • Coolant level drain line with valves, fan with guard
    • Inlet/Outlet connections
    • Elbow
    • Muffler and spark-arresting muffler with companion flanges
    • Exhaust Expander
    • Flexible Fitting
    • Flange
    • Oxidation catalyst
    • Gas pressure regulator
    • Gas shutoff valve 24V, ETR (Energized-To-Run)
    • Gas Knockdown Regulator
    • Fuel filter
    • Manual voltage control
    • Generator air filter
    • Cable access box
    • Medium and high voltage generators and attachment
    • European bus bar
    • Low voltage extension box
    • Bearing temperature detectors
    • Jacket water heater
    • Battery with cables and rack (shipped loose)
    • 24V starting motors
    • 60A, 24V charging alternator (requires engine driven pumps)
    • Tool set
    • Digital diagnostic tool
    • US AID Emblem
    • Special paint order
    • Cold-weather bundle including enclosure heaters and ventilation recirculation
    • Fire suppression system
    • Interior DC lighting system with automatic shutoff timer

    What Our Customers Are Saying About Us

    Gregory Poole Equipment Company place picture
    3.9
    Based on 46 reviews
    powered by Google
    David Lawrence profile pictureDavid Lawrence
    13:04 22 Feb 24
    Brandon Pierce profile pictureBrandon Pierce
    22:00 18 Feb 24
    Darin Noe profile pictureDarin Noe
    01:17 16 Feb 24
    Jose Soto profile pictureJose Soto
    15:26 23 Sep 23
    Hunter Elliott profile pictureHunter Elliott
    16:17 07 Sep 23
    Rick Kelly-Crapse profile pictureRick Kelly-Crapse
    21:06 25 Aug 23
    They had all my parts for my 3208 Cat.
    Friendly folks at parts counter.