C18 Generator Set

Duty Cycle	Standby, Prime
Emissions/Fuel Strategy	Low Fuel Consumption
Frequency	60 Hz
Maximum Rating	600 ekW
Minimum Rating	500 ekW
Speed	1800 rpm
Voltage	220 to 380 Volts

Aspiration	Air to Air Aftercooled
Bore	5.71in
Compression Ratio	14.5:1
Displacement	1106.4in³
Engine Model	C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Fuel System	Electronic unit injection
Governor Type	Adem™A4
Stroke	7.2in

Height - Maximum	107.8in
Length - Maximum	218.5in
Width - Maximum	80.9in

Standard Equipment:

Air cleaner

Package mounted radiator

Exhaust flange outlet

Fuel priming pump
Secondary fuel filters
Primary fuel filter with integral water separator

IP23 Protection
Matched to the performance and output characteristics of Cat engines
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Busbar

GCCP 1.3

Rubber vibration isolators

24 volt starting motor
Batteries

Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment:

Industrial, residential, critical mufflers

Anti-condensation heater
Oversize and premium generators
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Circuit breakers, UL listed
Circuit breakers, IEC compliant

Remote monitoring software
Local & remote annunciator modules
Digital I/O module
GCCP 1.4
Load share module

Oversize batteries
Battery chargers
Heavy duty starting system
Jacket water heater
Charging alternator

Narrow, wide or skid base
CSA Certification
UL 2200 package
EU Certificate of Conformance (CE)
Enclosures: Sound attenuated, weather protective
Single or dual wall integral fuel tanks
Integral & sub-base UL listed dual wall fuel tanks
Automatic transfer switches (ATS)
Sound attenuated, weather protective or high ambient weather protective enclosure
The following options are based on regional and product configuration:
Single or dual wall sub-base fuel tanks
EEC Declaration of Conformity
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Optional BS799 Compliant Integral Dual Wall Fuel Tank Base

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

2 months ago

Rich Stidd

2 months ago

Carlos Virgilio Sauceda Rivera

3 months ago

John Karpathian

5 months ago

Clean store and great employees

Hunter Flaugher

11 months ago

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

1 year ago

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

2 years ago

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.