Generator Set Specifications
- Minimum Rating
-
12.0 ekW
- Maximum Rating
-
13.2 ekW
- Emissions/Fuel Strategy
-
R96/EUIIIa Equivalent
- Voltage
-
110 to 415 Volts
- Frequency
-
60 Hz
- Speed
-
1800 rpm
- Duty Cycle
-
Standby, Prime
Engine Specifications
- Engine Model
-
CatĀ® C1.5
- Bore
-
3.3in
- Stroke
-
3.5in
- Displacement
-
91.3in³
- Compression Ratio
-
22.5:1
- Aspiration
-
Naturally Aspirated
- Fuel System
-
Indirect Injection
- Governor Type
-
Mechanical
Generator Set Dimensions
- Length - Maximum
-
55.1in
- Width - Maximum
-
24.4in
- Height - Maximum
-
41.5in
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner; light duty with disposable element
- Air cleaner; light duty with disposable element
-
- Control Panel
-
- EMCP 4.1
- EMCP4.1 control panel
-
- Cooling System
-
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guards
- Caterpillar extended life coolant
- Coolant drain line with valve
- Radiator and cooling fan with guards
-
- Exhaust System
-
- Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
- Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
-
- Fuel System
-
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank / base supplied
-
- Generators And Generator Attachments
-
- 12 leads
- Voltage regulator (single phase sensing)
- IP23 Protection
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- Segregated low voltage (AC/DC) wiring panel
- Tower panel, IP22, bottom cable entry
- Segregated low voltage (AC/DC) wiring panel
- Tower panel, IP22, bottom cable entry
- 12 leads
- IP23 Protection
-
- Governing System
-
- Mechanical governing system
- Mechancial governing system
-
- Lube System
-
- Lubricating oil
- Oil drain line with valve
- Lubricating oil
- Oil drain line with valve
-
- Mounting System
-
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant
- includes lifting provisions and termination points for coolant
- Captive linear vibration isolators between base and engine-generator
-
- Starting / Charging System
-
- 12 Volt battery with rack and cables
- 12V battery with rack & cables
-
- General
-
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment:
-
- Alternator Options
-
- Coastal insulation protection
-
- Certificates
-
- Global certification for CIS
- European upgrade to STD set for CE certificate
-
- Circuit Breakers
-
- Pad-locable breaker device
- 4 Pole circuit breaker
-
- Control Panel Options
-
- Volt free contacts for genset running
- Battery charger
- Emergency stop with key
- EMCP 4.2
- Volt free contacts for common alarm
-
- Cooling System
-
-
- Enclosures
-
- Single point lift for enclosure
- Sound attenuated enclosure (GALV)
-
- Fuel System
-
- Low fuel level alarm
- Skidbase for open sets
- 1000 hr extended service interval
- Base feet
- Fuel transfer control
- Skidbase for Enclosures
- DEFRA bunded fuel tank
-
- Mounting Options
-
- Battery removal
- Silencer installation kit
- Industrial silencer removal
-
- Special Test And Inspection
-
- PGS test report @ 1.0 power factor
-
- General
-
- Packing case - canopied set
- Radiator Stone Guard
- Packing Case - compact set