3516E Generator Set

Duty Cycle	Standby
Emissions/Fuel Strategy	Tier 2 Equivalent - 1808 rpm
Frequency	50 Hz
Maximum Rating	3500 kVA
Minimum Rating	3000 kVA
Speed	1808 rpm
Voltage	380 to 11000 volts

Aspiration	ATAAC
Bore	6.69in
Compression Ratio	14.7:1
Displacement	4765in³
Engine Model	3516E, V-16, 4-Stroke Water-Cooled Diesel
Fuel System	Electronic Unit Injection
Governor Type	Adem™5
Stroke	8.46in

Dry Weight - Genset (maximum)	52911lb
Dry Weight - Genset (minimum)	47620lb
Height - Maximum	131.6in
Height - Minimum	132.6in
Length - Maximum	363.1in
Length - Minimum	353.3in
Width - Maximum	104in
Width - Minimum	104in

Standard Equipment:

Air Cleaner; single element canister type

Text alarm / event descriptions
Emergency stop pushbutton
IVR includes reactive droop capability
KVAR / PF modes
EMCP 4.2B
3 Phase voltage sensing
Generator mounted - rear facing
Generator set packages include:
24 Volt DC operation
Caterpillar's Voltage Regulato
RFI suppression
Environmental sealed front face
Limiter and exciter diode monitor
Min / max exciter
Controls:
Speed adjust
Alarm acknowledge
Auto / start / stop control
Engine cycle crank
Engine cool
Customizable screens
PLC functionality
Lamp test
Load histogram feature
Accessory module data link
Reverse power (kW) (32)
6 Customer programmable digital inputs
3 Phase
+/- 2% accuracy
High coolant temperature
0 True RMS AC metering
Programmable protective relaying functions:
Reverse reactive power (kVAr) (32RV)
Communications:
Generator phase sequence
Over / under voltage (27/59)
Overcurrent (50/51)
RPM
Number of I/O varies on options selected:
Overspeed
Serial annunciator module data link
Low coolant temperature
4 Programmable relay outputs (Form A)
1 Programmable relay outputs (Form C)
3 Analog inputs
Over / under frequency (81 o/u)
Digital indication for:
Low coolant leve
Failure to start (overcrank)
Cat Connect
1 Programmable digital outputs
DC volts
Operating hours
Coolant temperature
Oil pressure (psi, kPa or bar)
Amps (per phase & average)
Power Factor (per phase & average
Frequency (Hz)
Volts (L-L & L-N)
kW (per phase, average & percent)
kVA (per phase, average & percent
kVAr (per phase, average & percent)
Warning/shutdown with common LED indication of shutdowns for: Low oil pressure - High coolant temperature - Overspeed - Emergency stop - Failure to start (overcrank) - Low coolant temperature - Low coolant level -
Low oil pressure
kW-hr (total)
kVAr-hr (total)

ATAAC - 3516E Package radiators shipped installed
Certified standard PGS provided

Flanged faced outlet(s)
Dry exhaust manifold

Secondary fuel filters
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose

Right hand servicing
Caterpillar yellow with high gloss black rails and radiator
SAE Standard rotation
Flywheel and flywheel housing - SAE No. 00

NEMA standard hole pattern
Medium Voltage:
Anti condensation space heater
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby)
Winding temperature detectors
High Voltage:
Busbar connections, right side extension box, bottom cable entry
Form wound
Low Voltage: Random wound - Internal Excitation - Winding temperature detectors - NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby) - Busbar connections, top center mounted, top cable entry - NEMA standard hole pattern
6 Lead
Permanent magnet
3 Phase brushless, salient pole
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

ADEM A5

English

Integral lube oil cool
Oil filter, filler and dipstick
Oil drain lines and valve
Gear type lube oil pump
Lubricating oil
Fumes disposal

Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)

24 Volt electric starting motor
Battery disconnect switch
Battery and battery rack w/cables
45 Amp charging alternator

Optional Equipment:

EMCP 4.3, EMCP 4.4

Single element filter
Dual element air cleaner

Standard ambient radiators
Water level switch gauges
Optional installed ATAAC radiators
Optional installed radiators
Coolant
Standard ambient ATAAC radiators

Ventilation system
No explosion relief valves
Explosion relief valves

Y-Adapters

Fuel Priming Pumps (Tier 4) - Manual or electric
Primary Fuel Filter

Special paint (Colors other than Caterpillar yellow or high performance paints)
US aid emblem

Space heater
Differential current transformers (DCT) 8.7 kV and 15 kV classes
Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame
Alternator air cleaner
Thermostate for space heater
Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames
Generator conversion

Pyrometer and thermocouples

Oil level regulator
Prelube pumps
Lube oil in standard sump

Puck style low efficiency isolators
Spring type vibration isolators
IBC vibration isolators

Neutral ground connections
Center post busbar
Right side power connections

Generator set fuel consumption test
PGS test report @ 1.0 power factor
Standard engine test charge
Canadian Standards Association certification
generator test report
IBC certification
OSHPD certification
Fuel consumption test
Torsional vibration analysis reports
PGS test report @ 0.8 power factor

Starter cover
Air pressure regulator
10, 20, 35 and 50 amp battery chargers
24 Volt battery set - Dry
Jacket water heaters
Air starting motors
Electric starting motors
Engine barring device

Platinum, Gold and Silver coverage

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

review us on

Tom Corona

3 months ago

Rich Stidd

3 months ago

Carlos Virgilio Sauceda Rivera

4 months ago

John Karpathian

6 months ago

Clean store and great employees

Hunter Flaugher

12 months ago

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

1 year ago

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

2 years ago

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.