| Bore | 3.7in |
|---|---|
| Desplazamiento | 203in³ |
| Modelo de motor | Gato C3.3B DIT (turbo) |
| Potencia bruta - SAE J1995 | 74,3HP |
| Potencia del volante de la red | 72.9HP |
| Net Power - ISO 9249 | 73.7HP |
| Net Power - SAE 1349 | 72.9HP |
| Peak Torque - 1,500 rpm - SAE J1995 | 195ft·lbf |
| Golpe | 4.7in |
| Breakout Force - Tilt Cylinder | 7355lb |
|---|---|
| Nota | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou |
| Capacidad operativa nominal | 2700lb |
| Rated Operating Capacity with Optional Counterweight | 3055lb |
| Tipping Load | 5400lb |
| Nota | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou |
|---|---|
| Peso operativo | 8296lb |
| Bucket Pin Height - Carry Position | 7.9in |
|---|---|
| Bucket Pin Height - Maximum Lift | 124.9in |
| Bucket Pin Reach - Maximum Lift | 15.5in |
| Bumper Overhang - Rear Axle | 42.6in |
| Clearance at Maximum Lift and Dump | 93.7in |
| Ángulo de salida | 26° |
| Despeje del terreno | 8.9in |
| Altura - Parte superior de la cabina | 83.1in |
| Length - With Bucket on Ground | 146.2in |
| Length - Without Bucket | 117.9in |
| Maximum Dump Angle | 51° |
| Maximum Overall Height | 157.8in |
| Maximum Reach - With Arms Parallel to Ground | 50.9in |
| Nota | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional cou |
| Rack Back Angle - Maximum Height | 84° |
| Reach - Maximum Lift/Dump | 30.9in |
| Turning Radius from Center - Bucket | 85.9in |
| Turning Radius from Center - Coupler | 55.2in |
| Turning Radius from Center - Machine Rear | 71.1in |
| Vehicle Width over Tires | 66in |
| Base de la rueda | 49.2in |
| FOPS | ISO 3449:2005 Level I |
|---|---|
| ROPS | ISO 3471:2008 |
| Chain Box - Each Side | 3.3gal (US) |
|---|---|
| Sistema de refrigeración | 3.7gal (US) |
| Cárter del motor | 3gal (US) |
| Tanque de combustible | 27.7gal (US) |
| Sistema hidráulico | 13.7gal (US) |
| Tanque hidráulico | 10.3gal (US) |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76HP |
|---|---|
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32gal/min |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44HP |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335psi |
| Travel Speed - Forward or Reverse - One Speed | 7.7 millas/h |
|---|---|
| Travel Speed - Forward or Reverse - Two Speed Option | 11mile/h |
| Inside Cab* | 81dB(A) |
|---|---|
| Nota (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Nota (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee |
| Nota (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 101dB(A) |
| Aire acondicionado | El sistema de aire acondicionado de esta máquina contiene el refrigerante de gas fluorado de efecto invernadero R134a (Potencial de Calentamiento Global = 1430). El sistema contiene 1,0 kg de refrigerante que tiene un equivalente en CO2 de 1.430 toneladas métricas. |
|---|
