Bore | 5.4in |
---|---|
Desplazamiento | 1649.5in³ |
Emisiones | U.S. EPA Tier 4 Final or Tier 2 equivalent |
Modelo de motor | Cat® C27 ™ |
Gross - ISO 14396 | 752HP |
Poder de la red | 699HP |
Net Power - SAE J1349 | 699HP |
Peak Torque - 1,200 rpm | 2624lb/ft |
Velocidad nominal | 1,800/min |
Rated Speed - Gross - ISO 14396 | 752HP |
Rated Speed - Gross - SAE J1995 | 766HP |
Rated Speed - Net Power - SAE J1349 - High Ambient | 648HP |
Rated Speed - Net Power - SAE J1349 - Standard Ambient | 699HP |
Golpe | 6in |
Aumento del par de torsión | 18% |
Peso operativo | 202398lb |
---|---|
Tipping Load - Articulated 35° | 81896lb |
Tipping Load - Straight | 92990lb |
Direct Drive - Forward 1 | Lock-up disabled |
---|---|
Direct Drive - Forward 2 | 8.5 millas/h |
Direct Drive - Forward 3 | 15.2mile/h |
Direct Drive - Reverse 1 | 5.4 millas/h |
Direct Drive - Reverse 2 | 9.6mile/h |
Direct Drive - Reverse 3 | 16.4mile/h |
Adelante - 1 | 4.5 millas/h |
Adelante - 2 | 8.3mile/h |
Adelante - 3 | 14.2mile/h |
Nota | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
Reverso - 1 | 4.9mile/h |
Reverso - 2 | 9.1 millas/h |
Reverso - 3 | 15.5mile/h |
Transmission Type | Cat-Planetenlastschaltgetriebe |
Front | Fijo |
---|---|
Oscillation Angle | 8.5° |
Rear | Trunnion |
Dump | 2.9s |
---|---|
Lower | 3.7s |
Lower Float Down | 3.6s |
Rack Back | 4.8s |
Raise | 9.4s |
Sistema de refrigeración | 54.9gal (US) |
---|---|
Diferencial - Final Drives - Frontal | 71.6gal (US) |
Diferencial - Accionamientos finales - Trasero | 68.9gal (US) |
Cárter del motor | 20gal (US) |
Tanque de combustible | 294.3gal (US) |
Hydraulic System Factory Fill | 210gal (US) |
Hydraulic Tank - Implement and Hydraulic Fan | 68.9gal (US) |
Hydraulic Tank - Steering and Braking | 34.9gal (US) |
Transmisión | 29.1gal (US) |
Cylinders, Double Acting - Lift, Bore and Stroke | 254 mm × 1264 mm (10.0 in × 49.8 in) |
---|---|
Cylinders, Double Acting - Tilt, Bore and Stroke | 317.5 mm × 819 mm (12.5 in × 32.2 in) |
Lift/Tilt System | Pistón de desplazamiento variable |
Lift/Tilt System - Circuit | Positive flow control |
Maximum Flow at 1,800 rpm (1) | 216gal/min |
Maximum Flow at 1,800 rpm (2) | 22.2gal/min |
Pilot System | Open loop and pressure reducing |
Relief Valve Setting - Lift/Tilt | 4786psi |
Relief Valve Setting - Main | 507psi |
Maximum Flow at 1,400 rpm | 94.5gal/min |
---|---|
Relief Valve Setting - Steering | 4641psi |
Steering System - Circuit | Pilot, load sensing |
Steering System - Pump | Piston, variable displacement |
Total Steering Angle | 70° |
Machine Sound Level (ISO 6395:2008) | 115dB(A) |
---|---|
Operator Sound Level (ISO 6396:2008) | 69dB(A) |
Machine Sound Level (ISO 6395:2008) | 113dB(A) |
---|---|
Operator Sound Level (ISO 6396:2008) | 69dB(A) |
Dump Angle at Maximum Lift | 29.3 degrees |
---|---|
Fork Height at Maximum Lift | 18.3ft |
Fork Height with Level Arms | 8.9ft |
Fork Top Clamp Opening | 12.3ft |
Front Axle Centerline to Fork Tip | 17.6ft |
Ground to Bumper Clearance | 3.1ft |
Ground to Center of Front Axle | 3.9ft |
Ground to Lower Hitch Clearance | 2ft |
Ground to Top of Exhaust Stacks | 16.6ft |
Ground to Top of Hood | 12.7ft |
Ground to Top of ROPS | 17.2ft |
Altura del pasador de bisagra en la elevación máxima | 19.4ft |
Maximum Overall Length | 45.4ft |
Rear Axle - Centerline to Bumper | 12,5 pies |
Base de la rueda | 15.1ft |
Fork End Area | 78ft² |
---|
Frenos | SAE J1473 OKT90, ISO 3450:1992 |
---|