Bore | 3.4in |
---|---|
Desplazamiento | 147in² |
Modelo de motor | Cat C2.4* |
Poder bruto | 42HP |
Máxima potencia bruta | 42HP |
Net Power - 2,200 rpm - ISO 9249 R-ing | 40HP |
Net Power - 2,200 rpm - SAE J1349 R-ing | 40HP |
Nota | *Engine meets U.S. EPA Tier 4 Final emission standards. |
Golpe | 4in |
Peso operativo | 9414lb |
---|
Capacidades de los cubos | 0.6-1.0 m3 (0.8-1.3 yd3) |
---|---|
Bucket Capacities - General Purpose | 0.6 m3 (0.8 yd3) |
Bucket Capacities - Light Material | 1.0 m3 (1.3 yd3) |
Velocidad de viaje | 12.4mile/h |
---|
3rd Auxiliary Flow | 14gal/min |
---|---|
Hydraulic Cycle Time - Lower, Float | 2.4s |
Main Relief | 3481psi |
Hydraulic Cycle Time - Dump | 0.7s |
---|---|
Hydraulic Cycle Time - Lift | 4.4s |
FOPS | ISO 3449:2005 Level I |
---|---|
ROPS | ISO 3471:2008 |
Sistema de refrigeración | 3gal (US) |
---|---|
Aceite de motor | 2.4gal (US) |
Tanque de combustible | 11.4gal (US) |
Sistema hidráulico | 6.3gal (US) |
Articulation Angle | 40° |
---|---|
Altura de la cabina | 8,25 pies |
Departure Angle - Degrees | 30° |
Profundidad de excavación | 6in |
Dump Angle at Maximum Height | 40° |
Fork Depth Above Ground | 2in |
Fork Height at Maximum Reach | 4.67ft |
Fork Reach at Maximum Height | 2ft |
Despeje del terreno | 10in |
Hinge Pin at Maximum Height | 10.08ft |
Load Over Height | 9.17ft |
Machine Width** | 5.58ft |
Maximum Dump Height* | 7.5ft |
Maximum Fork Height | 9.83 pies |
Alcance máximo | 4,5 pies |
Nota (1) | *Vary with bucket size. |
Nota (2) | **Vary with tire size. |
Nota (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
Overall Length - With Bucket* | 15.75ft |
Overall Length - With Forks | 17.08ft |
Reach - Ground Level | 2,67 pies |
Reach at Maximum Dump Height* | 2.33ft |
Steering Angle | 80° |
Tire Gauge | 4.33ft |
Turning Radius - Inside Tire** | 5.92ft |
Turning Radius - Over Bucket* | 13.17ft |
Base de la rueda | 6.42ft |
Width - Over Bucket* | 5.83ft |
Articulation Angle | 40° |
---|---|
Altura de la cabina | 8,25 pies |
Departure Angle - Degrees | 30° |
Profundidad de excavación | 8in |
Dump Angle at Maximum Height | 40° |
Fork Depth Above Ground | 2in |
Fork Height at Maximum Reach | 4.67ft |
Fork Reach at Maximum Height | 2ft |
Despeje del terreno | 10in |
Hinge Pin at Maximum Height | 10.58ft |
Load Over Height | 9.67ft |
Machine Width** | 5.58ft |
Maximum Dump Height* | 8ft |
Maximum Fork Height | 10.33ft |
Alcance máximo | 4.92ft |
Nota (1) | *Vary with bucket size. |
Nota (2) | **Vary with tire size. |
Nota (3) | Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. |
Overall Length - With Bucket* | 16.17ft |
Overall Length - With Forks | 17.58ft |
Reach - Ground Level | 3.25ft |
Reach at Maximum Dump Height* | 2.42ft |
Steering Angle | 80° |
Tire Gauge | 4.33ft |
Turning Radius - Inside Tire** | 5.92ft |
Turning Radius - Over Bucket* | 13.42ft |
Base de la rueda | 6.42ft |
Width - Over Bucket* | 5.83ft |
Fuerza de ruptura | 6160lbf |
---|---|
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** | 5401lb |
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** | 5512lb |
Nota (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
Nota (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
Nota (3) | ***Manual quick coupler, precleaner hood. |
Nota (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
Peso operativo | 9414lb |
Rack Back - Transport Position | 51° |
Capacidad nominal del cubo | 0.8yd³ |
Rated Operating Load at Full Turn - Bucket*** | 2701lb |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** | 3366lb |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** | 2524lb |
Straight Tipping Load - Bucket*** | 6415lb |
Tire Size | 33 × 15.5-16.5, 12 PR |
Fuerza de ruptura | 6204lbf |
---|---|
Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** | 5004lb |
Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** | 5115lb |
Nota (1) | *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. |
Nota (2) | **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. |
Nota (3) | ***Manual quick coupler, precleaner hood. |
Nota (4) | Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. |
Peso operativo | 9462lb |
Rack Back - Transport Position | 51° |
Capacidad nominal del cubo | 0.8yd³ |
Rated Operating Load at Full Turn - Bucket*** | 2502lb |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** | 3148lb |
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** | 2361lb |
Straight Tipping Load - Bucket*** | 5975lb |
Tire Size | 33 × 15.5-16.5, 12 PR |
Bucket Type | General Purpose |
---|---|
Bucket Width | 70in |
Dump Height | 90in |
Maximum Material Density | 3169lb/yd³ |
Nota | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
Rated Capacity | 0.8yd³ |
Bucket Type | Light Material |
---|---|
Bucket Width | 74in |
Dump Height | 85in |
Maximum Material Density | 1989lb/yd³ |
Nota | Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. |
Rated Capacity | 1.3yd³ |