| Bore | 5,1 pulgadas |
|---|---|
| Desplazamiento | 763 pulgadas... |
| Modelo de motor | Cat® C13B |
| Engine Power (ISO 14396) | 370hp |
| Potencia bruta (SAE J1995) | 361hp |
| Net Power (SAE J1349) | 351hp |
| Sin reducción del motor por debajo | 12500 pies |
| Nota (1) | La potencia anunciada se prueba según la norma especificada vigente en el momento de la fabricación. |
| Nota (2) | Advertised power is tested at 1,800 rpm. |
| Nota (3) | Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. |
| Nota (4) | Net power when the fan is at maximum speed is 262 kW (351 hp) per the SAE reference conditions. |
| Nota (5) | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Stage V emission standards. |
| Nota (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1:2006. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Par motor máximo bruto (SAE J1995) | 1579lbf·ft |
| Red de par máximo del motor (SAE J1349) | 1564lbf·ft |
| Régimen de par máximo del motor | 1200r/min |
| Golpe | 6,2 pulgadas |
| Carga útil nominal | 30 toneladas (US) |
|---|
| Apilado (SAE 2:1) | 22.1yd³ |
|---|---|
| Struck | 17.7yd³ |
| Adelante - 1 | 5 millas/h |
|---|---|
| Adelante - 2 | 9 millas/h |
| Adelante - 3 | 14 millas/h |
| Adelante - 4 | 21 millas/h |
| Adelante - 5 | 29 millas/h |
| Adelante - 6 | 34 millas/h |
| Reverso - 1 | 6millas/h |
| Nota (1) | The declared dynamic operator sound pressure level is 72 ± 2 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling |
|---|---|
| Nota (2) | Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or doors/windows open for extended periods or in noisy environments. |
| Eje central - Vacío | 12368lb |
|---|---|
| Eje central - Cargado | 41524lb |
| Eje central - Carga nominal | 29156lb |
| Eje delantero - Vacío | 33356lb |
| Eje delantero - Cargado | 34789lb |
| Eje delantero - Carga nominal | 1433lb |
| Eje trasero - Vacío | 11839lb |
| Eje trasero - Cargado | 40995lb |
| Eje trasero - Carga nominal | 29156lb |
| Total - Vacío | 57563lb |
| Total - Cargado | 117308lb |
| Total - Carga nominal | 59156lb |
| Escriba | Acero Brinell HB450 de alta resistencia al desgaste |
|---|
| Tiempo de expulsión | 12s |
|---|---|
| Tiempo de retracción | 15s |
| Sistema de refrigeración | 21.9gal (US) |
|---|---|
| Tanque DEF | 9gal (US) |
| Cárter del motor | 11,4gal (US) |
| Transmisiones finales/Diferenciales | 33gal (US) |
| Tanque de combustible | 106gal (US) |
| Sistema hidráulico | 32,5gal (US) |
| Caja de engranajes de transferencia de salida | 6.6gal (US) |
| Transmisión | 12.4gal (US) |
| Frenos | ISO 3450:2011 |
|---|---|
| Cabina - FOPS | ISO 3449:2005 Nivel II |
| Cabina - ROPS | ISO 3471:2008 |
| Dirección | ISO 5010:2019 |
| Nota | Las dimensiones son para máquinas equipadas con neumáticos 750/65 R25. |
|---|---|
| Dimensiones de giro - Anchura del pasillo | 214en |
| Dimensiones de giro - Radio de giro | 318en |
| Dimensiones de giro - Radio interior | 148en |
| Dimensiones de giro - Radio de giro SAE | 294en |
| Dimensiones de giro - Ángulo de dirección - Izquierda/Derecha | 45° |
| De cerradura a cerradura | 4,75 segundos a 60 rpm |
|---|
| Hydraulic Excavators: 336 - Passes | 5-6 |
|---|---|
| Hydraulic Excavators: 350/352 - Passes | 4-5 |
| Nota | An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased |
| Wheel Loader: 950 - Passes | 5 |
| Wheel Loader: 962 - Passes | 4-5 |
| Wheel Loaders: 966/966 XE - Passes | 4 |
| Wheel Loaders: 972/972 XE - Passes | 3-4 |
