CC2.7 GC Utility Compactor

Peso máximo de operación	3114lb
Peso máximo en el tambor delantero	2882lb
Peso máximo en las ruedas traseras	2836lb
Peso operativo estándar con ROPS	5718lb

Ancho de compactación	51,7 pulgadas
Diámetro del tambor	28,3 pulgadas
Ancho del tambor	47.2in
Altura - ROPS	102.2in
Longitud total	100.2in
Ancho total	51,7 pulgadas
Base de la rueda	70,9 pulgadas

Modelo de motor	C1.7T
Potencia del motor (1)	24.7hp

Fuerza centrífuga - Máxima	6968.8lb
Frecuencia	62Hz
Amplitud nominal - Alta	0,02 pulgadas

Despeje de la zona residencial	17,8 pulgadas
Drum Offset	2in
Despeje del terreno	11,2 pulgadas
Carga lineal estática	61 lb/pulg
Velocidad de viaje - Máxima	5.3 millas/h
Radio de giro - Borde interior del tambor	100in
Radio de giro - Borde exterior del tambor	147,2 pulgadas

Capacidad del tanque de combustible	14.37gal (US)
Capacidad del tanque de rociado de agua	42.24gal (US)

Equipo estándar:

Adjustable Suspension Seat with Operator Presense Switch
ROPS Plegable
Seat Belt - 75 mm (3 in) high visibility orange
Operator Console w/ Water Tank Gauge, Emergency Stop, and Glove Box
Toma de corriente de 12 voltios
Bocina, alarma de seguridad

Rascadores plegables
Vibe Selection - front, rear, or both
Pressurized, Triple-Filtration Spray System with Test Mode

Auto Engine Off and Auto Warmup
Filtro de aire, elemento doble
Protector de la correa del motor

Telemática

LED Working Lights

Vandal Protection - lockable hood, fuel fill, and controls cover
Vida útil de la máquina y amarres
Offsets Hitch

Equipo opcional:

ROPS Fijo
Sun Canopy
Seat - Side Shift
Palancas de propulsión dobles

Fixed Scrapers
Cocoa Mats
Edge Cutter Ready
Water Sprayer Antifreeze Kit
Ballast Kit - 200 kg (440 lb)
Ballast Kit - 400 kg (880 lb)

Control de tracción

Remote Flash / Troubleshoot
CMV - Compaction Measurement Value

Desconexión de la batería
LED Roading Lights
Baliza ámbar giratoria

Biodegradeable Hydraulic Oil
Bumpers
Levantamiento de un solo punto
Custom Paint

What Our Customers Are Saying About Us

Gregory Poole Equipment Company

4.0

Based on 58 reviews

revísanos en

Tom Corona

21:51 06 Mayo 26

Rich Stidd

22:10 02 Mayo 26

Carlos Virgilio Sauceda Rivera

20:55 23 Mar 26

John Karpathian

16:21 24 Jan 26

Clean store and great employees

Hunter Flaugher

12:56 06 Aug 25

Hydraulic pump shop is unmatched. I made the mistake of going somewhere else before bringing my pump here. These guys were more than helpful and friendly. Went out of their way to help me find a solution for my problem even when it didn’t benefit them. This is how businesses should be run. I won’t go anywhere else.

Brian Hrudka

16:45 12 Feb 25

Too bad Poole Cat Field Service is better at invoicing than actually getting my machines moving.

A prompt and courteous technician arrived, and correctly diagnosed two problems with my mini Ex. Thank you. I corrected those problems, but machine still did not work.

He diagnosed a fuel problem as a clogged filter, rather than a bad fuel pump which I managed to diagnose. I also figured out, via help on the internet, that the fuel shut-off solenoid was bad.

Machine runs fine now. So my advice is to check the internet, before letting Poole charge you $870 for a two hour field visit. And you can find a perfectly fine aftermarket fuel pump for $20 rather than the $250 that Poole charges... and it arrives faster,

Jacey Price

21:04 05 Dec 24

Need to teach a tech how to drive a service truck. Around 2:48 on highway 40 east, the truck pictured (plate ending in 8236) flew across 3 lanes of traffic to meet the Cleveland rd exit. Almost hit a semi and caused me to swerve with my children in the car. Glad making the exit was more important than children’s lives.