CAREERS
(800) 451-7278
Contact us
SEARCH

CALL US
CONTACT US
MENU

Cat® C1.5 Diesel Engine

  • Home
  • Cat® C1.5 Diesel Engine

    • The Cat® C1.5 Industrial Diesel Engine is offered in rating 18.4 bkW (24.7 bhp) @ 1800 rpm and meet U.S. EPA Tier 4 Final emission standards. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

    Request a quote

    The Cat® C1.5 Industrial Diesel Engine is offered in rating 18.4 bkW (24.7 bhp) @ 1800 rpm and meet U.S. EPA Tier 4 Final emission standards. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.

    Request a quote
    Maximum Power 24.6HP
    Maximum Torque 63.4lb-ft @ 1800 rpm
    Minimum Power 24.6HP
    Rated Speed 2200/2800 rpm
    Emissions U.S. EPA Tier 4 Final
    Aftertreatment -
    Aspiration Naturally Aspirated (NA)
    Bore 3.3in
    Combustion System Indirect Injection
    Compression Ratio 22.5:1
    Displacement 91in³
    Engine Configuration In-Line 3
    Rotation from Flywheel End Counterclockwise
    Stroke 3.5in
    Height 25.3in
    Length 22.5in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments 327lb
    Width 17.9in

    Standard Equipment:

    • Air Inlet System
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 65 amp
      • Starter motor 12 volt
      • Glow plug starting aid
      • Tier 4 Final: Alternator 12V 85 amp
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
      • Choice of cooling fans
    • Flywheel & Flywheel Housing
      • Naturally Aspirated: SAE No. 7 1/2 flywheel
      • Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
      • Electronic Shut-off Solenoid (ESOS)
    • Lube System
      • Alternative oil fillers
      • Spin-on lube oil filter
      • Lube oil pressure switch
      • Lube oil sump
    • Power Take Off (pto)
      • Provision for Power Take Off (PTO)
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Gradeability 35° continuous

    Optional Equipment:

    Contact Us Today

    Get In Touch
    Call: (800) 451-7278