Motores auxiliares marinos Cat C280

Equipo estándar:

• Sistema de entrada de aire

  • R INLET SYSTEM Aftercooler, fresh water, corrosion resistant coated (air side) Air inlet shutoff Breather, crankcase, top-mounted Turbocharger, rear-mounted, engine oil lubricated

• Sistema de control

  • Single Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)

• Sistema de refrigeración

  • El agua del refrigerante del motor se drena

• Sistema de escape

  • Un colector de escape seco y hermético a los gases

• Sistema de combustible

  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C) Fuel transfer pump (mounted on left hand side) Duplex fuel filters Electronically Controlled Unit Injectors

• Sistema de lubricación

  • Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the engine running. Oil filler and dipstick Valve, oil pressure regulating Valves, crankcase explosion relief

• General

  • Paint, Caterpillar yellow Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water

• Svce Tools/ship Prot/factory Support

  • Service literature. Included standard with each engine are two (2) complete sets of service literature listed below: 1. Custom parts book CD (serial number specific) 2. Service manual, which includes: Operation & Maintenance, Specifications, Systems Operation, Testing and Adjusting, Disassembly and Assembly manual. Available in paper media and English language only. 3. Technical manual (parts/service information for special equipment). Available in paper media in English language only. NOTE: Custom parts book CD and service manual can be re-ordered through the normal Caterpillar literature ordering system. The technical manual can only be re-ordered through the Project Services at the Caterpillar Lafayette Engine Center facility.

Equipo opcional:

• Sistema de entrada de aire

  • Limpiadores de aire

• Sistema de refrigeración

  • Jacket Water Heaters
  • Heat Recovery System
  • Heat Recovery Thermostats
  • Cooling System Connection Groups
  • De-Aerator

• Sistema de control

  • Módulo de reparto de carga
  • Direct Rack Module

• Sistema de escape

  • Outlet Expander
  • Flexible Exhaust Fittings
  • Weld Flange - Optional

• Sistema de combustible

  • Fuel Priming Pump
  • Duplex Primary Fuel Strainer
  • Fuel System Connections

• Sistema de lubricación

  • Oil Pan Drain Valve
  • Prelubrication Connections
  • Lube Oil Heater

• Sistema de montaje

  • Aisladores de vibración

• Requisitos de la Sociedad Marina

  • El blindaje de los aerosoles

• Sistema de protección

  • PLC Monitoring System Options
  • ECP Relay System Options
  • ECP Mechanical Gauge Instrument Panel
  • Turbocharger Speed Sensor
  • Cylinder Pressure Relief Valve
  • Oil Mist Detector
  • Protection System Components
  • Magnetic Pickup

• Kits de piezas de repuesto

  • Intake and Air System
  • Basic Engine
  • Cabeza de cilindro
  • Sistema de combustible
  • Sistema de refrigeración
  • Instrumentación
  • Cylinder Valve Kits

• Engine Testing

  • Basic System Testing
  • Special Witness Test
  • Análisis de vibración torsional

• Service Tools / Shipping Protection / Factory Support

  • Puesta en marcha
  • Service Tools
  • Factory Packaging
  • Shipping Protection-Shrink Wrap or Tarp
  • Shipping Protection-Export Boxing
  • AID Emblem
  • Storage Preservation