Engine
- Engine Model
-
C15 Cat®
- Net Power
-
405HP
- Net Power - Direct Drive - Torque Rise
-
33%
- Net Power - Converter Drive - Torque Rise
-
8,5%
- Maximum Altitude - Without Derating (Tier 3 Final/Stage IIIA Equivalent)
-
9098ft
- Bore
-
5.4in
- Displacement
-
927.6in³
- Emissions
-
Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
- Gross Power
-
435HP
- High Idle Speed
-
2300r/min
- Low Idle Speed
-
800r/min
- Maximum Altitude - Without Derating (Tier 4 Final/Stage IV)
-
9298ft
- Maximum Net Torque - 1,300 rpm
-
1478.8lb/ft
- Net Power - Converter Drive - Gross Power
-
435HP
- Net Power - Direct Drive - Gross Power
-
412HP
- Rated Power (Net ISO 9249)
-
405HP
- Rated Power (Net SAE J1349)
-
405HP
- Stroke
-
6.7in
Operating Specifications
- Operating Weight
-
78326lb
- Operating Weight - Tier 4 Final/Stage IV
-
78326lb
- Operating Weight - Tier 3 Final/Stage IIIA Equivalent
-
77340lb
Transmission
- Travel Speeds - Forward - Third
-
10.7mile/h
- Travel Speeds - Reverse - Third
-
12.2mile/h
- Transmission Type
-
Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
- Travel Speeds - Forward - First
-
3.4mile/h
- Travel Speeds - Forward - Second
-
6mile/h
- Travel Speeds - Reverse - First
-
3.9mile/h
- Travel Speeds - Reverse - Second
-
6.9mile/h
Hydraulic System
- Pump Flow at 1,800 rpm
-
30.9gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
-
120 mm × 1070 mm (4.7 in × 42.1 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
-
95.25 mm × 216 mm (3.75 in × 8.5 in)
- Main Relief Pressure
-
3495psi
- Maximum Supply Pressure
-
3495psi
Hydraulic System - Steering
- Vehicle Articulation Angle
-
86 degrees
- Bore
-
4.5in
- Maximum System Flow
-
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
- Steering Pressure Limited
-
3481psi
- Steering System - Circuit
-
Double Acting – End Mounted
- Steering System - Pump
-
Piston – Variable Displacement
- Stroke
-
22.7in
Blades
- Height - Including Cutting Edge
-
3.4ft
- Blade Tip Angle - Total
-
14,8°
- Blade Tip Angle - Forward
-
7,3°
- Blade Tip Angle - Back
-
7,5°
- Blade Tilt Angle - Right - Mechanical
-
5,1°
- Blade Tilt Angle - Left - Mechanical
-
4,1°
- Blade Tilt Angle - Right - Hydraulic
-
6,3°
- Blade Tilt Angle - Left - Hydraulic
-
5,4°
- Total Tilt Adjustment
-
2.9ft
- Blade Tilt Angle - Left Full
-
10,1°
- Blade Tilt Angle - Right Full
-
10,8°
- Maximum Depth of Cut
-
1.97ft
- Maximum Lift Above Ground
-
3.14ft
- Moldboard - Length
-
14.4ft
- Width - Over End Bits
-
15.18ft
Wheels
- Weight
-
16167lb
- Outside Diameter
-
5.5ft
- Drum Diameter
-
4.3ft
- Drum Width
-
3.7ft
- Tips per Wheel
-
65
- Width - Over Drums
-
11.98ft
Dimensions (Approximate)
- Turning Radius - Inside of Push Arms
-
8.6ft
- Centerline of Rear Axle to Edge of Counterweight
-
9.3ft
- Ground Clearance
-
1.6ft
- Ground Clearance - Bumper
-
2.7ft
- Height - ROPS/Canopy
-
13.3ft
- Height - Top of Beacon
-
14.4ft
- Height - Top of Exhaust Pipe
-
14.1ft
- Height - Top of Hood
-
10.4ft
- Hitch to Centerline of Front Axle
-
6.1ft
- Length - With Blade on Ground
-
28.1ft
- Wheel Base
-
12.1ft
- Width - Over Wheels
-
11.98ft
Axles
- Front
-
Planetary – Fixed
- Oscillation Angle
-
±8°
- Rear
-
Planetary – Oscillating
Braking System
- Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
Cab - Standard
- Machine Sound Level (ISO 6395)
-
113dB(A)
- Operator Sound Level - ISO 6396
-
73dB(A)
Cab - Suppression
- Machine Sound Level (ISO 6395)
-
110dB(A)
- Operator Sound Level - ISO 6396
-
72dB(A)
Service Refill Capacities
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV)
-
8.5gal (US)
- Differential - Final Drives - Front
-
26.4gal (US)
- Differential - Final Drives - Rear
-
29.1gal (US)
- Fuel Tank
-
206.6gal (US)
- Hydraulic Tank Only
-
35.4gal (US)
- Transmission
-
17.4gal (US)
- Cooling System
-
30.6gal (US)
- Engine Crankcase
-
9gal (US)
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Air to air aftercooler
- Autoshift
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C15: – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Hydraulically driven demand fan
- Integrated braking system
- Muffler (under hood) (Tier 3/Stage IIIA equivalent)
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Single Clutch Speed Shifting (SCSS)
- Starting aid (ether) automatic
- Throttle lock
- Torque converter with Lock Up Clutch (LUC)
- Transmission, planetary, with 3F/3R speed range control
-
- Electrical
-
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free (4 – 1,000 CCA)
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Light, warning unswitched (LED strobe)
- Lighting, access stairway
- Lighting, under hood
- Lighting system, halogen (front and rear)
- Lights, directional (rear)
- Starter, electric (heavy duty)
- Starting receptacle for emergency start
-
- Operator Environment
-
- 12V power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Compaction control (ready)
- Coat and hard hat hooks
- Electro-hydraulic tilt and lift controls
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Internal four-post rollover protective structure (ROPS/FOPS)
- Laminated glass
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, heated ready
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Comfort (cloth) air suspension
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
- Wet-arm wipers/washers (front and rear)
- Intermittent wipers (front and rear)
-
- Tires, Rims And Wheels
-
-
- Guards
-
- Guard, driveshaft
- Guards, crankcase and power train
-
- Blades
-
- Bulldozer straight blade, hydraulics, and linkage are included in the base machine
-
- Fluids
-
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
-
- Other Standard Equipment
-
- Cleaner bars with teeth
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
- Fast fuel system
- Fire suppression ready
- Fuel tank, Fast Fill, 782 L (207 gal)
- Hitch, drawbar with pin
- Hoses, Cat
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Product Link
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
- Fold down exhaust stack for shipping
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
-
- Technology Products
-
- Compaction control, basic
-
- Fluids
-
- Antifreeze, –50° C (–58° F)
-
- Starting Aids
-
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
-
- Miscellaneous
-
- Film (ANSI) (Tier 4 Final/Stage IV)
- EU certification (Tier 4 Final/Stage IV)
- Plate – year of manufacture (Tier 3/Stage III Equivalent)