Oil and Gas

Transmission Specifications

Gross Input Power
2500BHP
Gross Peak Input Torque
8914ft-lb
Rated Input Speed
1900r/min
Gears
6F/0R
1F Gear Ratio
4.54
2F Gear Ratio
3.33
3F Gear Ratio
2.99
4F Gear Ratio
2.46
5F Gear Ratio
2.20
6F Gear Ratio
1.62

Standard Equipment:

  • Cat Engines For Optimized Power Train
    • Cat 3512C (HD)
    • Cat 3512E (HD)
  • Transmission Rotation
    • Input rotation — counterclockwise
    • Output rotation — counterclockwise(as viewed from rear)
  • Torque Converter
    • Factory installed torque converter
    • Series — TC58733-ESLF
    • Stall torque ratio — 2.30
  • Clutches
    • Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
    • Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
  • Installation Connections
    • 2 cooler
    • 1 electrical
  • Oil System
    • Cat Transmission/Drive Train Oil-4 (TDTO)
    • Oil temperatures continuous - 80°C (195°F)
    • Hydraulic Fill Capacity — Approx. 108L (28.5 gal), 104 L (27.5 gal) initial fill; 87 L (23 gal) refill; subject to cooler size, lines, and installation
    • Filter Type — 6 micron synthetic, cartridge remote mount
  • Mountings
    • Input connection (flywheel) — SAE #0
    • Output connections (yoke) - GWB 390.65, GWB 390.60
    • Structural application subject to Caterpillar approval
  • Control System
    • Electronic Control Unit (ECU)
    • Electronic data link, SAE J1939
    • Electrical system 24V
  • Power Take-off Drives
    • Mounting Type: J704 SAE Bolt, Location: 12 o’clock, Rated Power: 150HP @1900RPM
    • Mounting Type: J744 SAE C, Location: 10 o’clock, Rated Power: 150HP @1900RPM

Optional Equipment: