Oil and Gas

Engine Specifications

Minimum Rating
215BHP
Maximum Rating
325BHP
Emissions
NSPS Site Compliant Capable
Displacement
891in³
Compression Ratio
9.4:1
Aspiration
Naturally Aspirated or Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
113
Weight - Dry
3000lb
Oil Change Interval
750 hours
Ignition, Protection
Altronic III
Stroke
6.5in
Bore
5.4in

Capacity for Liquids

Cooling System
10gal (US)
Lube Oil System - Refill
20gal (US)

Standard Equipment:

  • Air Inlet System
    • Air cleaner — heavy-duty
    • Air cleaner rain cap
    • Service indicator
  • Control System
    • Governor — Woodward PSG mechanical
    • Governor locking — positive control
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheel & Flywheel Housing
    • SAE No. 1 flywheel
    • SAE No. 1 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator
    • Natural gas carburetor
  • Ignition System
    • Altronic III ignition system
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Auxiliary oil reservoir
    • Oil pan — full sump
    • Oil filler in valve cover, dipstick — RH
  • Mounting System
    • Engine supports
  • Protection System
    • Shutoffs
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and drive pulleys
    • Lifting eyes

Optional Equipment:

  • Air Inlet System
    • Precleaner
  • Charging System
    • Battery chargers
    • Charging alternators
    • Charging alternators f/u/w c customer supplied shutoffs
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Control System
    • PSG Woodward governor
  • Cooling System
    • Radiators
    • Non-sparking blower fan
    • Blower fans for customer supplied radiators
    • Fan drives for customer supplied radiators
    • ATAAC conversion
    • Aftercooler
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbow
    • Flange
    • Pipe
    • Rain cap
    • Muffler
  • Fuel System
    • Fuel filter
    • Natural gas valve and jet kits
  • Ignition System
    • CSA shielded ignition
    • Wiring harness
  • Instrumentation
    • Gauges and instrument panels
  • Lube System
    • Auxiliary oil reservoir removal
    • Lubricating oil
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft and flywheel stub shaft
  • Protection System
    • Gas valves
  • Starting System
    • Air starting motor
    • Electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motor— single 12- and 24-volt
    • Starting aids
    • Battery sets, cables, and rack
  • General
    • Damper guard