Oil and Gas

Transmission Specifications

Gross Input Power
2300BHP
Gross Peak Input Torque
6656ft-lb
Rated Input Speed
1900r/min
Gear Type
Straight Planetary Spur
Gears
8F/0R
1F Gear Ratio
3.34
2F Gear Ratio
2.45
3F Gear Ratio
2.20
4F Gear Ratio
1.81
5F Gear Ratio
1.62
6F Gear Ratio
1.36
7F Gear Ratio
1.19
8F Gear Ratio
1.00

Dimensions

Width
44.4in
Height
41.3in
Weight
3873lb
Length
74.5in

Standard Equipment:

  • Cat Engines For Optimized Power Train
    • Cat 3512B
    • Cat 3512C
    • Cummins QSK45
    • Cummins QSK50
    • MTU 12V4000
  • Transmission Rotation
    • Input rotation — counterclockwise
    • Output rotation — counterclockwise (as viewed from rear)
  • Torque Converter
    • Integral torque converter
    • Series - TC58927-ESLF
    • Stall torque ratio - 2.20
  • Clutches
    • Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
    • Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
  • Installation Connections
    • 2 oil cooler lines
    • 1 electrical connector
  • Oil System
    • Cat Transmission/Drive Train Oil-4 (TDTO)
    • Sump oil temperatures
    • Hydraulic Fill Capacity — Approx. 108 L (28.5 gal), 125 L (33 gal) initial fill; subject to cooler size, lines, and installation
    • Filter Type — 6 micron synthetic, cartridge remote mount
  • Mountings
    • Input connection (flywheel) — SAE #0
    • Output connections (yoke) — GWB 390.60/GWB 390.65
    • Structural application subject to Caterpillar approval
  • Control System
    • Electronic Control Unit (ECU)
    • Electronic data link, SAE J1939
    • Electrical system 24V
  • Power Take-off Drives
    • Location
    • Mounting type: J744 SAE C
    • Rated power
    • Rotation: Clockwise as installed on SAE C pad
    • Ratio, 1.216:1

Optional Equipment:

  • Integral Power Take-off
    • Location: 12 o'clock
    • Mounting type: J704 SAE 8 bolt
    • Rated power
    • Rotation:
    • Ratio - 1.088:1