Oil and Gas

Engine Specifications

Minimum Rating
1125BHP
Maximum Rating
1125BHP
Emissions
U.S. EPA Non-road Tier 4 Final
Rated Speed
1800r/min
Bore
5.7in
Stroke
6.4in
Displacement
1958in³
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
6107lb
Oil Change Interval
250
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136

Capacity for Liquids

Minimum Cooling System - Engine Only
15.9gal (US)

Dimensions

Length
85in
Width
49in
Height
63in

Standard Equipment:

  • Air Inlet System
    • Twin side-mounted turbochargers, ATAAC
  • Control System
    • Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
  • Cooling System
    • Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
  • Exhaust System
    • Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
  • Fuel System
    • Mechanical Electronic Unit Injection (MEUI) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
  • Lube System
    • Crankcase fumes filtration system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour

Optional Equipment: