Oil and Gas

Engine Specifications

Minimum Rating
755BHP
Maximum Rating
800BHP
Emissions
U.S. EPA Non-road Tier 4 Final
Rated Speed
1800r/min
Bore
5.7in
Stroke
7.2in
Displacement
1104in³
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
3482lb
Oil Change Interval
250 - 500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

Minimum Cooling System - Engine Only
7.1gal (US)

Dimensions

Length
60.2in
Width
37.8in
Height
50.5in

Standard Equipment:

  • Air Inlet System
    • Turbocharged Aftercooled
  • Control System
    • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
  • Cooling System
    • Vertical outlet thermostat housing, centrifugal water pump
  • Exhaust System
    • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
  • Flywheels And Flywheel Housing
    • SAE 0 and SAE 1 flywheel housing
  • Fuel System
    • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
  • Lube System
    • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
  • Power Take Off
    • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
  • General
    • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment: