Industrial

Power Rating

Maximum Power
188HP
Maximum Torque
609lb-ft @ 1400 rpm
Rated Speed
2200 rpm
Minimum Power
137HP

Emission Standards

Emissions
EU Stage V, U.S. EPA Tier 4 Final

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1in
Stroke
5in
Displacement
268.5in³
Compression Ratio
16.0:2
Aspiration
Turbocharged Aftercooled (TA) or Twin Turbocharged Aftercooled (TTA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR

Power Unit Dimensions

Length
60.3in
Width
34.2in
Height
53.7in
Weight
1559lb

Standard Equipment:

  • Air Inlet System
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels And Flywheel Housing
    • Wide choice of drivetrain interfaces, including SAE No. 2 and SAE No. 3 configurations
  • Fuel System
    • Electronic high pressure common rail
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
    • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
  • General
    • Available with or without a balancer
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment / Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC) / Diesel Particulate Filter (DPF) / Selective Catalytic Reduction (SCR)
    • No ash service requirement
    • Passive regeneration

Optional Equipment: