Dozers

Engine

Engine Model
Cat C4.4
Power - Net
80HP
Displacement
269in³
Bore
4.13in
Stroke
5in
Rated Net Power - 2,200 rpm - SAE J1349
80HP
Note
Engine meets U.S. EPA Tier 4 Final emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80HP

Weights

Operating Weight - XL
17465lb
Operating Weight - LGP
18442lb
Note (1)
Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
18896lb
Note (2)
Enclosed cab adds 225 kg (495 lb).

Transmission

Drive Pumps
1
Track Motors
2
Relief Valve Settings
7033psi
Maximum Travel Speed - Reverse
6.2mile/h
Maximum Travel Speed - Forward
5.6mile/h

Hydraulic Controls

Pump Output
17.7gal/min
Relief Valve Settings
2988psi

Winch

Weight
1345lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Overall Width
29.2in
Drum Width
10.8in
Throat Clearance
6.75in
Rope Diameter - Recommended
0.63in
Rope Diameter - Optional
0.75in
Drum Capacity - Recommended Cable
371ft
Maximum Line Pull - Bare Drum
40000lb
Maximum Line Pull - Full Drum
25000lb
Maximum Line Speed - Bare Drum
131ft/min
Winch Length
27.76in
Maximum Line Speed - Full Drum
207ft/min
Drum Diameter
10in
Drum Capacity - Optional Cable
256ft

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Reach - Ground Line
30.2in
Maximum Ground Clearance Under Tip
17.6in
Overall Width
67.3in
Maximum Digging Depth
13.3in

Undercarriage

Number of Rollers - Each Side
6
Shoe Width - XL
16in
Length - Track on Ground - XL
89in
Length - Track on Ground - LGP
89in
Track Gauge - XL
59in
Track Gauge - LGP
68in
Ground Contact Area - LGP
4425in²
Ground Contact Area - LGP, 762 mm (30 in)
5340in²
Track Gauge - LGP, 762 mm (30 in)
73in
Shoe Width - LGP
25in
Ground Pressure - XL
6.2psi
Ground Pressure - LGP, 762 mm (30 in)
3.6psi
Ground Pressure - LGP
4.2psi
Ground Contact Area - XL
2829in²
Length - Track on Ground - LGP, 762 mm (30 in)
89in
Number of Shoes - Each Side - SystemOne Undercarriage
38
Shoe Width - LGP, 762 mm (30 in)
30in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43

Dimensions

Width - Tractor - Standard Shoes - No Blade - XL
74.8in
Track Gauge - LGP
67.9in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in)
128.9in
Ground Clearance - XL
13in
Ground Clearance - LGP, 762 mm (30 in)
13in
BLADE: Maximum Tilt - LGP
17.2in
BLADE: Maximum Tilt - Intermediate
17.7in
BLADE: Maximum Angle (either side) - LGP
25°
BLADE: Blade Height - XL
35.8in
BLADE: Blade Height - LGP
33.8in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
Track Gauge - LGP, 762 mm (30 in)
73in
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in)
94.9in
Overall Length - With Blade - LGP, 762 mm (30 in)
167.6in
Tractor Height - LGP, 762 mm (30 in)
108.8in
BLADE: Blade Capacity (SAE) - Intermediate
1.96yd³
BLADE: Blade Capacity (SAE) - LGP
2.17yd³
BLADE: Blade Capacity (SAE) - XL
1.99yd³
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate
52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - XL
52° to 58°
BLADE: Blade Height - Intermediate
33.9in
BLADE: Blade Lift Height - Intermediate
29.3in
BLADE: Blade Lift Height - LGP
28.7in
BLADE: Blade Lift Height - XL
28.7in
BLADE: Blade Width - Intermediate
115in
BLADE: Blade Width - LGP
124in
BLADE: Blade Width - XL
104.2in
BLADE: Blade Width at Maximum Angle - Intermediate
105.1in
BLADE: Blade Width at Maximum Angle - LGP
113.1in
BLADE: Blade Width at Maximum Angle - XL
95.2in
BLADE: Digging Depth - Intermediate
22.5in
BLADE: Digging Depth - LGP
22.5in
BLADE: Digging Depth - XL
22.5in
BLADE: Maximum Angle (either side) - Intermediate
25°
BLADE: Maximum Angle (either side) - XL
25°
BLADE: Maximum Tilt - XL
14.5in
Ground Clearance - LGP
13in
Length - Basic Tractor - Without Blade - LGP
128.9in
Length - Basic Tractor - Without Blade - XL
128.9in
Overall Length - With Blade - LGP
167.6in
Overall Length - With Blade - XL
168in
Track Gauge - XL
58.9in
Tractor Height - LGP
108.8in
Tractor Height - XL
108.8in
Width - Tractor - Standard Shoes - No Blade - LGP
92.9in

Service Refill Capacities

Crankcase - With Filter
2.91gal (US)
Final Drive - Each - XL
2.6gal (US)
Final Drive - Each - LGP
2.6gal (US)
Transmission - Hydraulic Tank
15.7gal (US)
Cooling System
5.92gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Fuel Tank
51.5gal (US)

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Sound Levels - ISO 6396:2008
79dB(A)
Sound Levels - SAE J1166 FEB2008
79dB(A)

Standard Equipment:

  • Electrical
    • Alternator, 12 volt, 120 Amp, heavy duty brushless
    • Alarm, backup
    • Batteries (2), heavy duty, maintenance free, 1,500 CCA
    • Diagnostic connector
    • Horn, electric
    • Lights, halogen, 2 front and 2 rear
    • Starter, electric, 12 volt
  • Operator Station
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Electronic Monitoring System with:
      – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level
      – Travel speed limiter, electronic
      – Engine RPM and gear display
      – Hour meter, electric
      – Engine air cleaner service indicator, electronic
      – Water-in-fuel indicator, electronic
    • Slope Indicate
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
  • Hydraulics
    • Hydraulics, 3 valve
    • Load sensing hydraulics
    • Single lever, three function control
    • Hydraulic pump and oil
    • Stable blade control
  • Power Train
    • Cat® C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final certified with aftertreatment
    • Aftercooler, Air-to-Air (ATAAC)
    • Aluminum bar plate cooling system (radiator, power train)
    • Air cleaner with precleaner, automatic dust ejection and under-hood intake
    • Dual path, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
  • Undercarriage
    • SALT Undercarriage
    • 6 roller track frame
    • Track rollers, lifetime lubricated
    • Carrier rollers
    • Track adjusters, hydraulic
    • Guards, front/rear guiding
    • Master link
  • Other Standard Equipment
    • Cat Product Link PLE732 Satellite/PLE742 Cellular
    • C-Frame, VPAT, hydraulic cylinders and lines
    • Lockable engine enclosures
    • Front pull device
    • Rigid drawbar
    • Ecology drains (engine, power train and implement oil and engine coolant)
    • Scheduled oil sampling ports (engine, power train implement oil)
    • Vandalism protection
    • Heavy duty crankcase guard
  • Antifreeze
    • Extended life coolant, –37° C (–35° F)

Optional Equipment:

  • Electrical
    • Integrated four front halogen lights, two rear halogen lights
  • Power Train
    • Drive, auxiliary
    • Installation, winch
  • Undercarriage
    • Track Pairs, XL:
      – Track, 406 mm (16 in) MS SystemOne
    • Track Pairs, LGP:
      – Track, 635 mm (25 in) MS SystemOne
      – Track, 762 mm (30 in) MS SystemOne
  • Operator Station
    • Cab with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Radio, AM/FM, Bluetooth
    • Sound suppression
  • Hydraulics
    • Hydraulics, 4 valve for use with ripper
    • Hydraulics, 4 valve for use with winch
  • Guards
    • Guard, rear, heavy duty
    • Grill, radiator, heavy duty
    • Guard, track guiding, center
    • Guard, track roller, full length
    • Screen, rear, cab
    • Screen, side, cab
    • Screen, rear, canopy
    • Screen, front and doors, canopy
    • Sweeps, front
    • Sweeps, rear
  • Blades
    • VPAT XL blade
    • VPAT LGP blade
    • VPAT Intermediate blade
  • Rear Attachments
    • Drawbar, towing
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
  • Rear Attachment Control
    • Control, ripper
    • Control, winch
    • Control, ripper and winch
  • Machine Control And Guidance
    • Cat GRADE with 3D
    • Cat GRADE with Slope Assist
    • Power Pitch blade control
  • Starting Aids
    • Heater, engine, coolant, 120 volt
    • Starting aid, ether
  • Other Attachments
    • Machine Security System
  • Antifreeze
    • Extended life coolant, –50° C (–58° F)
  • Field Installed Attachment
    • Winch, hydraulic, high performance, 40 m/min (131 ft/min) line speed
    • Winch, hydraulic retrieval, 15 m/min (50 ft/min) line speed